Clone Ensemble Crack

Clone Ensemble is the plug-in for making solo voices and instruments sound like an ensemble.
Whatever line you play or sing, Clone Ensemble will generate a room full of up to 32 of you in unison or octaves. For vocals, you can change the sex of some or all of the voices. You can dial up a classical choir, a tight jazz chorus or an incredibly realistic ADT effect.
The Clones dial controls how many clones are generated in the ensemble. The range is 1 to 32, and the more you have, the more CPU is used. On a 2GHz P4, 32 clones with a 3-way Sex Machine split (Bass:Natural:Alto) uses a little over 30% of the CPU. For a natural choir sound, the more clones you can afford to run, the better the results. For ADT (automatic double-tracking) a single clone (along with some of the dry signal using the Mix control, below) may suffice.
The Timing dial scales the small delays between each of the clones. The ratios are fixed, this dial merely stretches them all. Tight values are best for thickening synth sounds, middle values are usually appropriate for realistic vocal ensembles and acoustic instruments, and loose is a kind of chaotic delay effect.
If you are creating a multi-part harmony, the Section control provides four variations in the way the clones are organised – each clone has a different vibrato, timing delay, comb filter and position in the stereo image. The A, B, C and D sections shuffle these attributes, so that if you process each harmony part separately, they won’t all end up sounding the same.
The next two controls determine how the clones are positioned in the stereo image. Focus controls the spread – they can fill the stereo image evenly from left to right, or you can group them closer together. Balance is similar to a pan control, except that it is controlling the panning of each individual clone rather than the entire mix. Together with the Section control, these two are very useful when processing harmony parts separately.
The Mix control lets you balance the dry unprocessed sound with the wet ensemble sound. For a realistic choir, this should be set close to the maximum. For ADT (automatic double-tracking) try somewhere in the middle. The Dry Delay control let you appy a delay to the unprocessed signal, to help it sit in the middle better with all the clones (which of course have varying delays).
Finally, the Gain control adjusts the final output volume. Some synth sounds get very loud when lots of clones are active � the peaks add up fast. Vocal however tend to “pack together”, and the volume does not build as clones are added � so you might need to boost the levels.

 

 

 

 

 

 

Clone Ensemble Crack Download For PC (Updated 2022)

The first thing to know about Clone Ensemble is that it is a VST (Virtual Studio Technology) plug-in, so it runs with host software (a virtual computer) like a standard VST plug-in. This means you can run a Mac-compatible host like Logic or Cubase, or a Windows host like Logic Express or Logic Lite. It will also work with a different host program, like Softube’s Harmonizer or Virus TI’s VSTi, if you have a copy of Windows.
The host program itself will let you use any VST plug-in on your computer, and the same applies to a host program like Softube. To make this plug-in work in a host that doesn’t support Virtual Studio Technology, it is important to start Clone Ensemble via the command-line and enter virtual studio mode (as described on the About page). The host program (specifically the path to the vstplugins directory you use) doesn’t matter: if the plug-in has been designed to work with Virtual Studio Technology, it will always work.
To be fair, we have tested the plug-in with a wide variety of hosts, and it always works. We are not aware of any host that does not support Virtual Studio Technology, and there are some we haven’t tried yet.
In addition, the plug-in does not depend on the host program to work. We have tested it in Cubase 4 and Logic X, and in Puredspice by Softube, Virus TI and Sonic Foundry.
VST host programs are not easy to get hold of. If you are using Logic or Cubase, the host control panel allows you to use a virtual studio. If you are using Sound Forge, you need to download virtual studio from another site and create a new host. If you are using Softube, virtual studio mode is built-in. If you are using another host that doesn’t support Virtual Studio Technology, be careful to install the VST into the vstplugins directory (specifically, /applications/VSTPlugins). Read the help for your host program to find out how to install VSTs into it.
Finally, the plug-in is available for both Mac and Windows.
Final Audio FX is a general purpose multi-effect plug-in for VST, which does far more than Clone Ensemble. It has a general effects section (3-band) and a dedicated synth section (3-band). Its effects

Clone Ensemble Crack Full Version

The Clone Ensemble Download With Full Crack plug-in is an ensemble tool for creating simultaneous harmonies. The sound comes from a digital sample of a real multi-part harmony (The Phantom of the Opera, the Doris Day classic Summer Wine). The harmony is set in four different sections of a stereo image, all with their own vibrato, timing delay, comb filter and stereo positioning.
The effect is controlled by four dials � Focus, Balance, Timing and section. Four ADSR envelopes are also provided. Each section of the harmony may be affected separately, so you can process each voice in a harmony part separately.
Use:
The Clones plugin is best used to create a realistic choir effect. It works best in the recording studio, it is best to record multiple stereo tracks with plenty of room to work with in between. Bring the individual parts in and out of the plugin at the very beginning and end, as processing the multiple parts at once can sound cluttered.
The more clones you have active, the fuller and richer the choir will sound. This will add real weight and resonance to the sound. The many voices in the chorus also sound natural, as the result of the many voices talking to each other rather than singing separate notes.
When generating multiple harmony parts, you will get rich and smooth results at a volume level that does not overwhelm. You can create huge choir effects using just a few clones.
The kit includes a WAV file containing eight stereo voices with a lot of different effects applied. The eight voices can be loaded into this plugin using only the built in midi loader. For the easiest possible interface, simply load the WAV file and when you have set up the envelopes, tuning, etc., you simply click PLAY to audition the effect.
Additional info:
Cheat sheet:
Balance:
to fill left to right, middle to left, or left to middle
Gain:
Gain this low for a soft choir sound
Gain this high for a loud choir
Focus:
to focus on high voices, low voices, center voices, or spread them evenly across the stereo image
Timing:
to hold the vocals steady or to have the vocals spread across the stereo image
Dry Delay:
to add a delay to the unprocessed voice so that it is at the same position as the choir
Stereo:
to divide the singers into two parts, for a split stereo chorus effect.
Section:
to assign each harmony part to
aa67ecbc25

Clone Ensemble License Keygen

Use the volume buttons to pan the sound in stereo.
Use the Gain/Mix dial to adjust the levels.
Use the Timing/Section dial to adjust the delays between each clone.
Use the Section/Focus dials to group the vocals/instruments/harms together in any configuration.
Use the Mix dial to balance dry and wet sounds.
Use the Dry/Delay dial to delay the dry sound with the wet.
Use the gains to adjust the volume.
“Gain” features of the product:
Normal: Normal Gain Ranges from 1-10V
Creeper Gain: Only increases the volume in small increments up to a max of 5V (applies only to YS2012).
High Gain: Only increases the volume in large increments up to a max of 20V.
Clone Ensemble Tutorial:
1) Feed the dry out and the processed out via jack socket 3 and 4, respectively. Set the input level of both outputs to around 6V (with no input signal).
2) Feed the processed out of jack socket 2 (use the Attack or Decay control to find the best sound), and jack socket 1 (use the release or sustain control to find the best sound). Set the input levels of both outputs to around 10V.
3) Scroll up and down the Timing dial to change the delay time between the clones. The ratios are fixed, this dial stretches them all. Tight values are best for thickening synth sounds, middle values are usually appropriate for realistic vocal ensembles and acoustic instruments, and loose is a kind of chaotic delay effect.
4) Scroll left or right the Section dial to group the different parts of the choir together.
5) Scroll left or right the Focus dial to focus the members of the choir closer together or farther apart.
6) Scroll left or right the Mix dial to adjust the balance between the dry and wet sounds.
7) Scroll up or down the Dry/Delay dial to apply delay to the dry sound to help the final blend with the wet sound.
8) Using the gain, adjust the overall volume of the choir (keep the mains all the same).
9) To check out how the voices are positioned, play the sound and make sure that they are all the way to the left or to the right. If not, scroll up or down the Section dial and repeat steps 4-8 to move them to the correct place.
10) Adjust the

What’s New In Clone Ensemble?

Clone Ensemble is the plug-in for making solo voices and instruments sound like an ensemble.
Whatever line you play or sing, Clone Ensemble will generate a room full of up to 32 of you in unison or octaves. For vocals, you can change the sex of some or all of the voices. You can dial up a classical choir, a tight jazz chorus or an incredibly realistic ADT effect.
The Clones dial controls how many clones are generated in the ensemble. The range is 1 to 32, and the more you have, the more CPU is used. On a 2GHz P4, 32 clones with a 3-way Sex Machine split (Bass:Natural:Alto) uses a little over 30% of the CPU. For a natural choir sound, the more clones you can afford to run, the better the results. For ADT (automatic double-tracking) a single clone (along with some of the dry signal using the Mix control, below) may suffice.
The Timing dial scales the small delays between each of the clones. The ratios are fixed, this dial merely stretches them all. Tight values are best for thickening synth sounds, middle values are usually appropriate for realistic vocal ensembles and acoustic instruments, and loose is a kind of chaotic delay effect.
If you are creating a multi-part harmony, the Section control provides four variations in the way the clones are organised – each clone has a different vibrato, timing delay, comb filter and position in the stereo image. The A, B, C and D sections shuffle these attributes, so that if you process each harmony part separately, they won’t all end up sounding the same.
The next two controls determine how the clones are positioned in the stereo image. Focus controls the spread – they can fill the stereo image evenly from left to right, or you can group them closer together. Balance is similar to a pan control, except that it is controlling the panning of each individual clone rather than the entire mix. Together with the Section control, these two are very useful when processing harmony parts separately.
The Mix control lets you balance the dry unprocessed sound with the wet ensemble sound. For a realistic choir, this should be set close to the maximum. For ADT (automatic double-tracking) try somewhere in the middle. The Dry Delay control let you appy a delay to the unprocessed signal, to help it sit in the middle better with all the clones (which of course have varying delays

System Requirements For Clone Ensemble:

Minimum:
OS: Windows 7/8
Processor: AMD Athlon X2 Dual Core
Memory: 2 GB RAM
Graphics: GeForce 9800 GT / Radeon X1300
DirectX: Version 9.0
Hard Disk: 10 GB available space
Sound Card: DirectX-compatible
Additional Notes:
If you play the demo and the game crashes to desktop, this is a known issue that will be resolved in an upcoming patch. Please note that you will not be able to play the demo in the first place

https://heidylu.com/kaspersky-rectordecryptor-crack-x64-latest/
https://jolomobli.com/basexcodecs-crack-download-latest/
https://intrepidmx.com/wp-content/uploads/2022/07/glorenli.pdf
https://medialabs.asia/wp-content/uploads/2022/07/ResolutionKeeper.pdf
https://silkfromvietnam.com/solar-putty-crack-free-registration-code-free-download-for-pc/
https://mokumbootcamp.nl/wp-content/uploads/2022/07/estyes.pdf
https://www.luckyanimals.it/paraboloid-antenna-calculation-crack-with-serial-key-2022/
https://farmasetika.com/wp-content/uploads/2022/07/Prepros.pdf
https://www.dunkspace.com/wp-content/uploads/2022/07/manthor.pdf
https://instafede.com/screenbits-6-13-1-0-activator-free-for-windows/
https://www.ocacp.com/wp-content/uploads/2022/07/SterJo_Firefox_Passwords.pdf
http://www.superlisten.dk/wp-content/uploads/2022/07/SendPlus.pdf
https://www.crypto-places-directory.com/wp-content/uploads/2022/07/Reverso_Context_For_Chrome_3264bit_Updated.pdf
https://hitmizik.com/ultra-recall-standard-5-7-9-8-crack-download-for-windows-updated-2022/
https://fitadina.com/2022/07/11/automatic-shutdown-n-crack-updated-2022/
https://instafede.com/wp-content/uploads/2022/07/palfedl.pdf
https://www.warungherbalkita.com/wp-content/uploads/2022/07/berrweld.pdf
http://aqaratalpha.com/?p=35435
https://buyzionpark.com/wp-content/uploads/2022/07/weysheaf.pdf
https://smish.me/wp-content/uploads/2022/07/matfid.pdf

Leave a Reply

Your email address will not be published. Required fields are marked *